FLY ---

Good Morning. Teresa here again with another fun mixed media pendant ----- 

I LOVE the versatility of the Enamel Powders -- and the Enamel Adhesive makes it so easy to use these in unconventional ways. Even on metals - I've used another spoon bowl for this, but you could use it on many other pendant blank forms -

So let's shop -

Fine Feathers Necklace Set
Enamel Adhesive
Enamel Powders (link goes to the main category - I have used Royal Sterling and Turquoise Lagoon)
UV Resin  - this will cure in sunlight, but I used a UV light that I purchased at a salon supply (Sally).

Here we go.

See the damaged spoon. I make bracelets from the handles, as well as pendants and ornaments from the bowls. I embellish these in a collage manner, but some are too damaged for a transparent finish. Enamel Powder Colors are perfect for this.

I took the dauber from the enamel powder adhesive and poured a bit in another container.

Dip a small paintbrush in a coat the interior of the spoon bowl.

Using a heat gun - emboss this layer.

Just an FYI - a toaster oven works for this too and it doesn't blow ANY loose powder around. Just line the tray with foil if you will be using it for food prep as well and watch it carefully.

I used two coats of Royal Sterling Enamel Powder on this one.

Now for the special effects stuff.

Emboss a single feather with the Turquoise Lagoon Powder. This is a blue and aqua and silver and sparkly combination - simply wonderful.

Add a thin layer of resin to the spoon bowl and place the feather into position. Place under UV light (or in the sun) to cure (takes about 3-5 minutes).

add another layer of resin to adhere some tiny rhinestones -

Repeat curing process.

I love that the resin continues to add depth to the collage elements.

Now that I have a WONDERFUL way to cover the damage from years of use, I'll be making even more pendants and ornaments.

Have a wonderful Thursday -

A Bubble Background ATC

I love making ATC’s.  Not only are these trading card sized beauties fun to trade with other artists, but I use them on cards as well.  It makes it simple to make a card quickly when you already have the focal point done.

In making this ATC for Globecraft & Piccolo I used the following products:

Embossing Enamel in Mermaid Tears & Royal Sterling

ATC Bubble Background,LB101 (keep the pop out pieces!)

Embossing Fluid

Distress Paint & Distress Marker in Seedless Preserves

Purple Pre-Made ATC card

Ranger Archival Ink in Jet Black

Tim Holtz Simple Sayings Stamp Set, CMS155

Scrap Piece of Complimentary Color Paper

Crafters Pick Glue

First, I covered the ATC Bubble Background with Embossing Fluid and embossed it with Mermaid Tears. 

Embossed and Raw ATC Bubble Background

Close up, embossed w/ Mermaids Tears

I embossed the background a few times to get the coverage I wanted. Then I chose a few of the leftover pieces I had popped out of the Bubble Background and covered them in Embossing Fluid and embossed them with Royal Sterling (HINT: mark the piece on the correct side so when you emboss the piece it will fit correctly– ask me why I suggest this!).

Once everything was embossed, I fit the pop out pieces into the Bubble Frame and glued them in.  I did this by turning the Bubble Frame over and I spread some glue over the piece and the frame.  Since I knew I was going to attach this to an ATC I wasn’t too worried about the pieces falling out.  Once they dried, I just chose some areas on the Bubble Frame, dotted some glue and glued it onto the ATC card.  I also glued my ATC card to some left over cardboard to make it a bit more sturdy and then inked around the edges with the Seedless Preserves Distress Paint & filled in any gaps with the Seedless Preserves Distress Marker.

I inked my sentiment in the Jet Black ink, stamped it on a coordinating piece of scrap paper and trimmed it down.  I glued my sentiment to my ATC and I was done! Now I am all ready to pop this on a card when I want to remind someone I’m thinking of him or her.

This picture really shows the sparkle!

Thanks for stopping by! Don't forget to check out the daily posts on the Globecraft & Piccolo Blog, and my blog, Art Without Anxiety.  Hope you & yours have a GREAT week! Christi

Adding texture

Morning everyone, Tracy here. 

I wanted to show you today a pendant I have made that is slightly different...

I have used Royal Sterling Embossing Enamel and given 4 thick layers into a Teardrop bezel. Whilst it looked beautiful without me doing anything else i wanted to add some more texture, so whilst the immediately after heating the powder on the last coat I used a script rubber stamp...**PLEASE NOTE** do NOT use any other stamp other than rubber otherwise you risk damaging your stamp...Leave the stamp until the enamel has cooled and then slowly remove....and you then have some beautiful texture. 

 You can just see a hint of blue here, that is because i used some 3D enamel gel in Turquoise  and "buffed" over the surface with it, because the surface was so textured you find the gel sticks in certain areas...it is a lovely effect. I also rubbed some gilding wax in some areas and then finished off with a nice thick layer of Glastique Finishing Glaze  

 This picture shows all the different colours, texture and glaze perfectly. This technique can be used with so many different stamps....and it fun too :) 

Happy crafting 

Colorful Butterfly ATC

I am in love with Globecraft & Piccolo’s Embossing Enamel.  The colors are amazingly vibrant, colorful and each one is blended by hand in the USA.  The color combinations are incredible! Trust me when I tell you the pictures cannot capture the true beauty of this powder.  

Plus, you get a huge amount of powder for your money!  In the photo below I used a bottle of Distress Paint to illustrate how large the containers of the Embossing Enamel are:

Lots of yummy color!

I recently got some new colors and I always want to use my new goodies as soon as I get them, so I decided to make an ATC (artist trading card).

What I used to make my Butterfly ATC:

Frame from A157 VintageCorner Flourishes 

LA103 Large ButterflyAccents 

Embossing Enamel Deep Blue Sky, Royal Sterling and Ruby Red Slippers 

Embossing Fluid 

3D Gel Mars Black 

Decorative Paper

ATC blank

Crafters Pick Glue 

The first thing I did was use the Mars Black 3D Enamel Gel on the frame.  I just used it right out of the bottle.  The funny thing is the black comes out looking like a dark gray.

But it turns to a shiny deep black once it dries.  I set my frame out overnight covered with an extra bubble I had so no cats, or cat hair would get into it. I love how these frames are the perfect size for ATC's!

Then I took my butterfly blank and used a paintbrush to paint where I wanted the Embossing Enamel to adhere.  I use a paint brush so often that I actually poured some of the Embossing Fluid out of the bottle into a small, air tight container so I wouldn’t have to keep popping the top off of the applicator.  I brushed the fluid onto the butterfly blank and shook some Deep Blue Sky enamel onto the blank and heated until done.  I only used one layer of Enamel and I still got this awesome result:

Then I edged the butterfly in Royal Sterling Enamel, again using my paintbrush and embossing fluid.  When you use the fluid with a paintbrush you don’t have to re-dip the brush each time you use it- the brush retains a good amount of the fluid.  For the body I used Ruby Red Slippers – the butterfly is SO sparkly, I tried to capture it but it is very difficult.

See that bubble on the body? Popped it with a toothpick - POOF!

For my ATC I used a piece of cardboard from a mailing box.  You can get a lot of ATC’s from one box and they are sturdier than using just paper.  After I covered my cardboard with the decorative paper (I used a handmade paper in navy blue with little silver sparkles in it) I glued my frame and then my butterfly in the center.

I love the look of the multiple embossing enamels and I think the frame sort of holds it all together.  I hope you are getting some warmer weather where you are; I’m keeping an eye out for the real butterflies!

Thank you for stopping by ~

Blessings!
Christi